EMI power filters are equipped with input and output terminal blocks to connect with related machinery and equipment. Due to the different conditions of the relevant machinery and equipment, there are
During the design phase of a product, it is necessary to control the development process to ensure that EMC's design concepts and methods are implemented accordingly at each stage. In addition, EMC de
The standards commonly used in China's automotive electronic EMC routine testing are shown in Table 1. GJB 151B-2013 integrates the contents of GJB 151A-97 and GJB 152A-97, and adds and modifies some
Active EMI filtering theory is a relatively new EMI filtering method, which can weaken the interference signal, enable engineers to greatly reduce the size of passive filters, control costs, and impro
Electromagnetic compatibility (EMC) refers to the unbearable interference signal capability caused by any equipment in the wrong environment when the equipment or system operates according to regulati
EMI Receiver can perform quasi-peak measurement, peak measurement and average measurement. In the EMI peak, quasi-peak and average difference analysis, when the input signal is a sine wave, the readin
In order to ensure that electronic products will not affect other equipment in the complex electromagnetic environment, and will not be affected by other equipment, it is necessary to carry out strict
The anechoic chamber, as a test environment that replaces the outdoor wide field, has been widely used because of its sound characteristics. However, due to the high cost and expensive equipment that
Most applications of the equipment meet the requirements of standard EMC, with only one exception for non-standard EMC. Therefore, it is non-standard. EMC can be regarded as a part of the standard EMC
